Upholstered king bed with storage – King-size beds are large, with footprints of over 40 square meters, which is why they are popular. Building a storage bed for the frame of your king mattresses can hit this footprint in 60 cubic feet of storage space. This project will take two or three hours after collecting your timber. Collect a 76-inch plank and a 78-inch plank in an “L”, connecting them with two L-belts set on the inside corner. Position each bandage three inches from the edge of the log. 2. Add the other 76-inch plank to the other side of the 78-inch plank that forms a “C.” Connect it with two L-belts, set three inches from the edge of the log on the inside corner as you did with the first connection.
Upholstered king bed with storage ideas. Lay a plywood sheet over the open side of the frame you have built, with its inner edge flushing with the center of the central 78-inch plank. Screw it into place with a wooden screw per corner, driven down through the plywood and into the edge of the planks. Lay the other plywood slab down on the other side of the frame; flush the plywood slab you have screwed down. Attach it to the first plywood plate with the six hinges, distributed on 12, 24, 36, 48, 60 and 72 inches.
12 Photos Gallery of: Upholstered King Bed with Storage Ideas
Push a position according to the plywood on the open side of the bed frame, 16 inches from a 78-inch plank, its outer surface flushes with the edge of the plywood. Attach it using two wooden screws drilled through the plywood at the end of the post. Attach other posts the same way, every 16 inches from the post you just installed. These directions are for a standard king mattress. If you have a California king, adjust your timber dimensions fit a 72×84 inch mattress. You can make upholstered king bed with storage beds by adjusting the dimensions to fit other mattresses.