Upholstered king beds – Headboards head for a bed and add a touch of color and texture to the layout of your room. They also serve a practical purpose, providing a padded backrest. The headboard should be the same width as the bed, and sit at least 18 to 24 inches above the mattress so that it can be seen above the bedding. Heavy-Duty fabrics like linen and damask work best for the tire. Standard American King Bed is 76 inches long; but different manufacturers vary a bit, so measure your bed before starting the project.
Ideas for make upholstered king beds. Measure the width of the bed. Determine how high the head yard sticks above the bed and add the appropriate measurement to the height. Measure in appropriate height and width of the plywood sheet, and cut that size. Sand off any rough edges. Lay the plate on the floor and place the board on top. Cut around the board, leaving a compensation of 3 inches all around. Fold the edges of wicker over and Staple on the back of the board. Lay fabric on the floor, right side down. Lie on the board at the top, with the batting-covered side. Cut around the board, again leaving a compensation of 3 inches. Fold the fabric and staple in place.
12 Photos Gallery of: Ideas for Make Upholstered King Beds
Make upholstered king beds, turn headboard over. On the wrong side, measure and mark 10 inches in and up from each bottom corner. Drill through each selected point. Measure 10 inches from each drilled hole and drill another hole to make a total of four screw holes. Have an assistant stand up against the wall for you in the right place and use the point of a screw to mark through drilled holes and on the wall. Remove the headboard and drill the four screw holes. Put an anchor in each. Have your assistant take the weight of the board while screwing it onto the wall through the four holes.