Great Upholstered Sleigh Bed King
Upholstered sleigh bed king – Building a sleigh bed can be as simple or as complex as you want it to be. Once you have an idea of the basics, you can craft or customize the bed to suit your tastes and skill level. Remember, you are only as limited as your imagination. Adding a new headboard to your bed can be a fun and creative experience. The design, fabrics and colors are only limited by your imagination. Creating your new header can be achieved on a weekend. Measure the width of the bed and add 4 inches (10 cm). Determines how high the finished header will be. Cut the plywood in these dimensions, or have it cut in the wooden articles store.
Upholstered sleigh bed king, the top of the header can be left linear or can be cut with a jigsaw forming curves or any desired type of design. It is best to draw the designs on paper to determine the effect you prefer. Transfer the design to the plywood and cut with the jigsaw. Lightly sand the edges to remove roughness. Wrap the foam sheet or polyester wadding around the headboard and wrap it to the back of the headboard. Trim excess foam or wadding. Foam covers the sides of the headboard with desired fabric. Straighten and tighten the fabric, stapling it to the back of the headboard. Work your way along the head. Trim excess fabric.
Use pins or chalk to determine the location of the upholstered sleigh bed king buttons. Make a hole in the fabric and in the wood, where each button is to be placed. Use a 3/16 drill bit. Cover fabric buttons according to package directions. Upholstery stores will cover the buttons at a reasonable cost. Using a strong rope cut each button to 12 inches. Place a string through the looping button. Pass both ends of the cable through a large needle. Insert the needle through the holes drilled into the plywood. Extract the button by squeezing enough to form a small crater in the fabric. Attach it to the back of the headboard. Cover the back of the headboard with muslin cloth or lining. Hide all edges and swaddle.